Artistry Labs™ Aquabrasion Device
Artistry Labs™ Aquabrasion Device
-
$230.00
460 AmPerks Points
Use the Artistry Labs™ Aquabrasion Device as part of the Artistry Labs Retexturizing System.
Device not sold separately. Can only be purchased in combination with the Artistry Labs™ Retexturizing Refills.
Artistry Labs™Aquabrasion Device
If you have not yet purchased the Retexturizing System, order the skincare and device bundle here.
Warranty
Please refer to the Limited Warranty terms in the Resources tab for more information. If you suspect your Artistry Labs™ Aquabrasion Device may be defective, please contact the Amway Customer Service team. Please have your device with you. They will guide you through helpful steps to determine if your device needs to be sent in for replacement and will walk you through the process if it does.
Is the Retexturizing System right for your skin?
The Retexturizing System is an intensive routine that uses powerful formulas to transform the skin’s surface and may be counterproductive to people with skin sensitivity. The best way to determine your skin type is to pay close attention to your skin’s reaction to external stimuli. If you answer “yes” to any of the questions below, you likely have skin sensitivity, and the Labs Retexturizing System may not be for you.
Do you have reactive skin? Products such as soaps, detergents, fragrances, perfumes, skin care products and household products may cause your skin to react causing itchiness, dryness or reddening. In addition, exposure to cold, sun and wind can trigger flares.
Is your skin prone to redness? Most people with sensitive skin deal with some amount of redness. This can take the form of a red rash, red bumps, blushing and flushing, or even red dilated blood vessels. Usually, the redness will go away after removing the irritant or with minor treatment.
Are you experiencing excessive dry skin? Dry skin and sensitive skin can go hand-in-hand. It can lead to acne breakouts and cracked skin. You likely have more problems with dry skin in cold, dry weather and when exposed to wind.
Is your skin prone to rashes? Sensitive skin may react with a red, dry, flaky or bumpy rash when exposed to a trigger. This is especially true for products that are left on your skin, such as facial creams. You may develop a rash very quickly after contact.
Is your skin prone to breakouts? You may develop breakouts that look like acne with red bumps and pustules.
Does your skin sunburn easily? You are more susceptible to the harmful effects of the sun.
Is it permissible to exceed the Max line and fill the water tank beyond its capacity for utilizing the Artistry Labs Aquabrasion Device Suction mode?
As per the provided use instructions, it is strongly advised to refrain from filling the water tank above the Max line.
In the event that the water tank is filled above the Max line and subsequently attached to the device, there is a potential for water to spray out from the nozzle during the sealing process. The device's performance remains unaffected, and the extraction of water to a certain extent during the sealing process is a natural phenomenon.
What kind of water should be used with the Aquabrasion device?
For the best performance of the device functionality, soft water/purified water/bottled water or distilled water are recommended.
How should I clean my Aquabrasion Device?
Please refer to the Device Manual for detailed cleaning instructions. If you are still seeing any leftover residue on the waste tank, use an alcohol wipe or swab.
Suction Mode Instructions
- Place the appropriate Suction Nozzle on the Device.
- Fill the Water Tank with water.
- Turn the Device on by pressing the POWER Button.
- Choose the appropriate Suction Level by pressing the POWER Button again accordingly. The Device will take a few seconds to "ramp up" and get up to speed.
- Gently sweep the Device across the face ensuring the Suction Nozzle is in good contact with the skin.
- Continue until the entire face has been suctioned.
NOTE:
- Avoid the eye area.
- Do not hover the Device in a single spot for more than 3 seconds.
- If the Device is tipped too much, the Device will shut off. Restart the Device and continue sweeping.
- Stop if you feel excessive discomfort.
- You may experience slight redness of your skin during use. This is normal.
- Do not operate in Suction Mode without water in the Water Tank.
- Empty the Waste Tank and refill the clean Water Tank as many times as necessary throughout treatment. It takes about 30 seconds to empty the Waste Tank. You should expect to refill the Water Tank several times during a session. The Waste Tank is not removable from the Device.
- Do not shake, tip, or lay the Device down when the Waste Tank or Water Tank is full.
- The Device will automatically turn off after 5 minutes of use in Suction Mode to save power. If needed, turn the Device back on and continue.
When Suction Mode is Complete
- Press the POWER Button for 2 seconds to turn the Device off.
- Hold the device upright over the sink then slightly tilt to avoid spilling over your hands.
- Remove the bottom cap from the Waste Tank to allow the wastewater to drain into the sink then replace the cap and follow cleaning instructions.
- Ensure the Device and Suction Nozzles are properly cleaned and dry.
Serum Mode Instructions
- Attach the Dome Attachment to the Device by aligning the point on the Dome Attachment with the triangle on the Device.
- Hold the device upright then slightly tilt to avoid spilling over your hands.
- Push the Dome Attachment into place while sliding onto the ports. NOTE: You do not need water in the Water Tank during the Serum treatment.
- Turn the Device on by pressing the POWER Button.
- Press the SERUM Button. A red light will appear inside the Dome Attachment.
- Starting at the top of the forehead, hover or lightly touch the Dome on the face. The Device will beep after 3 seconds. 2-3 cm (1 inch) and repeat until the entire face is covered.
NOTE:
- Avoid the eye area.
- Do not shine the LED light into the eyes. If necessary, close eyes when using Serum Mode.
- Serum Mode will stay on for 10 minutes, but the treatment will not take that long. Simply turn off the device when completed.
When the SERUM Treatment is Complete
- Press the POWER Button for 2 seconds to turn off the Device.
- Grasp the Dome Attachment by the sides with two fingers and gently pull it outward and rinse it to clean.
- Return the Device to the Cradle and plug it in to charge.
- $230.00
Artistry Labs™ Aquabrasion Device
Artistry Labs™ Aquabrasion Device
-
$230.00
460 AmPerks Points
Use the Artistry Labs™ Aquabrasion Device as part of the Artistry Labs Retexturizing System.
Device not sold separately. Can only be purchased in combination with the Artistry Labs™ Retexturizing Refills.
Artistry Labs™Aquabrasion Device
If you have not yet purchased the Retexturizing System, order the skincare and device bundle here.
Warranty
Please refer to the Limited Warranty terms in the Resources tab for more information. If you suspect your Artistry Labs™ Aquabrasion Device may be defective, please contact the Amway Customer Service team. Please have your device with you. They will guide you through helpful steps to determine if your device needs to be sent in for replacement and will walk you through the process if it does.
Is the Retexturizing System right for your skin?
The Retexturizing System is an intensive routine that uses powerful formulas to transform the skin’s surface and may be counterproductive to people with skin sensitivity. The best way to determine your skin type is to pay close attention to your skin’s reaction to external stimuli. If you answer “yes” to any of the questions below, you likely have skin sensitivity, and the Labs Retexturizing System may not be for you.
Do you have reactive skin? Products such as soaps, detergents, fragrances, perfumes, skin care products and household products may cause your skin to react causing itchiness, dryness or reddening. In addition, exposure to cold, sun and wind can trigger flares.
Is your skin prone to redness? Most people with sensitive skin deal with some amount of redness. This can take the form of a red rash, red bumps, blushing and flushing, or even red dilated blood vessels. Usually, the redness will go away after removing the irritant or with minor treatment.
Are you experiencing excessive dry skin? Dry skin and sensitive skin can go hand-in-hand. It can lead to acne breakouts and cracked skin. You likely have more problems with dry skin in cold, dry weather and when exposed to wind.
Is your skin prone to rashes? Sensitive skin may react with a red, dry, flaky or bumpy rash when exposed to a trigger. This is especially true for products that are left on your skin, such as facial creams. You may develop a rash very quickly after contact.
Is your skin prone to breakouts? You may develop breakouts that look like acne with red bumps and pustules.
Does your skin sunburn easily? You are more susceptible to the harmful effects of the sun.
Is it permissible to exceed the Max line and fill the water tank beyond its capacity for utilizing the Artistry Labs Aquabrasion Device Suction mode?
As per the provided use instructions, it is strongly advised to refrain from filling the water tank above the Max line.
In the event that the water tank is filled above the Max line and subsequently attached to the device, there is a potential for water to spray out from the nozzle during the sealing process. The device's performance remains unaffected, and the extraction of water to a certain extent during the sealing process is a natural phenomenon.
What kind of water should be used with the Aquabrasion device?
For the best performance of the device functionality, soft water/purified water/bottled water or distilled water are recommended.
How should I clean my Aquabrasion Device?
Please refer to the Device Manual for detailed cleaning instructions. If you are still seeing any leftover residue on the waste tank, use an alcohol wipe or swab.
Suction Mode Instructions
- Place the appropriate Suction Nozzle on the Device.
- Fill the Water Tank with water.
- Turn the Device on by pressing the POWER Button.
- Choose the appropriate Suction Level by pressing the POWER Button again accordingly. The Device will take a few seconds to "ramp up" and get up to speed.
- Gently sweep the Device across the face ensuring the Suction Nozzle is in good contact with the skin.
- Continue until the entire face has been suctioned.
NOTE:
- Avoid the eye area.
- Do not hover the Device in a single spot for more than 3 seconds.
- If the Device is tipped too much, the Device will shut off. Restart the Device and continue sweeping.
- Stop if you feel excessive discomfort.
- You may experience slight redness of your skin during use. This is normal.
- Do not operate in Suction Mode without water in the Water Tank.
- Empty the Waste Tank and refill the clean Water Tank as many times as necessary throughout treatment. It takes about 30 seconds to empty the Waste Tank. You should expect to refill the Water Tank several times during a session. The Waste Tank is not removable from the Device.
- Do not shake, tip, or lay the Device down when the Waste Tank or Water Tank is full.
- The Device will automatically turn off after 5 minutes of use in Suction Mode to save power. If needed, turn the Device back on and continue.
When Suction Mode is Complete
- Press the POWER Button for 2 seconds to turn the Device off.
- Hold the device upright over the sink then slightly tilt to avoid spilling over your hands.
- Remove the bottom cap from the Waste Tank to allow the wastewater to drain into the sink then replace the cap and follow cleaning instructions.
- Ensure the Device and Suction Nozzles are properly cleaned and dry.
Serum Mode Instructions
- Attach the Dome Attachment to the Device by aligning the point on the Dome Attachment with the triangle on the Device.
- Hold the device upright then slightly tilt to avoid spilling over your hands.
- Push the Dome Attachment into place while sliding onto the ports. NOTE: You do not need water in the Water Tank during the Serum treatment.
- Turn the Device on by pressing the POWER Button.
- Press the SERUM Button. A red light will appear inside the Dome Attachment.
- Starting at the top of the forehead, hover or lightly touch the Dome on the face. The Device will beep after 3 seconds. 2-3 cm (1 inch) and repeat until the entire face is covered.
NOTE:
- Avoid the eye area.
- Do not shine the LED light into the eyes. If necessary, close eyes when using Serum Mode.
- Serum Mode will stay on for 10 minutes, but the treatment will not take that long. Simply turn off the device when completed.
When the SERUM Treatment is Complete
- Press the POWER Button for 2 seconds to turn off the Device.
- Grasp the Dome Attachment by the sides with two fingers and gently pull it outward and rinse it to clean.
- Return the Device to the Cradle and plug it in to charge.
By selecting cancel, the new IBO must complete the rest of the registration process, including payment. You will not be able to return to the payment option.
The new IBO will receive an email with a link to complete the process
The Usage Calculator helps you determine how much of a product your household will consume over time so you can order what you need, when you need it. It's a great tool for setting up DITTO™ scheduled orders.
Recommended Use:
- Usage Rate:
- Use(s) in product
- Recommended Use:
- Cost Per Use: